Spray to Protect DC68
Technical Documents
Safety Data Sheets
DC68 Safety Data Sheet SDS USA
DC68 Safety Data Sheet SDS Canada
DC68 Safety Data Sheet SDS Spanish
Listings and Approvals
State of California Approval of DC68 California Department of Forestry and Fire Protection Office of the State Fire Marshall Registered Flame Resistant Product
UL Certificate of Compliance
Underwriters Laboratories tested, listed and certified to NFPA 701, Fire Test for Flame-Resistant Textile and Films Test Method
DC68 Code Compliance
- IBC Section 424.2(5)(8) Children’s Play Structures Textiles and films complying with the flame fire propagation performance criteria contained in NFPA 701.
- IBC Section 806.3 Combustible decorative materials curtains, draperies, fabric partitions hangings and similar combustible decorative materials suspended from walls or ceilings shall comply with Section 806.4
- IBC Section 806.4 Acceptance criteria and reports to exhibit improved fire performance, curtains, draperies, fabric hangings and similar combustible decorative materials suspended from walls or ceilings shall be tested by an approved agency and meet the flame propagation performance criteria of NFPA701,
DC68 Performance Videos
Interior furniture and synthetic fabrics are the number one contributing factors to fire spread and smoke generation in today’s fires.
Fabric fire protection Spray to Protect DC68: is a water based fire proofing spray that is Non-Toxic, Hypoallergenic, colorless and odorless that can be used on virtually any water absorbent fabric or material to reduce its flammability.
Three components are necessary for fire: fuel, oxygen, and a source of ignition. Once Applied, DC68 disrupts the combustion stage of a fire cycle, including avoiding or delaying “ flashover,” or the burst of flames normally present when combustible materials burn. DC68 automatically reacts to fire or heat and converts combustible gases to non-combustible nitrogen and carbon dioxide. This dilutes the flammable gases and lowers the oxygen concentrations in the flame formation zone. This not only removes the oxygen required for fire, but also has a cooling affect that reduces heat and eliminates this as an ignition source.
Removing only one of the three required components will extinguish a fire, DC68 works to remove two- Oxygen and Heat.
*Not intended for use on Clothing