Breaking News from IFTI
Ignition Barrier Coating Over Spray Foam Has Industry Record
International Fireproof Technology’s (IFTI) intumescent coating DC 315 recently passed multiple foam manufacturers products at an industry best 400 sq ft per gallon as an ignition barrier. Lapolla’s FL 500 open cell, Certainteed’s half pound Certaspray, and Quadrant’s...
International Fireproof Technology, Inc. Expands Production Capabilities
International Fireproof Technology, Inc. recently announced that the company has doubled its production capabilities to support the demand for DC315. IFTI has now passed over 30 Thermal and Ignition Barrier tests over Lapolla, NCFI, Johns Manville, BASF, Quadrant,...
Ignition Barrier Coating Over Icynene Spray Foam Passes AC 377 Appendix X Testing
International Fireproof Technology Inc. (IFTI) recently announced that its spray applied coating, DC 315, passed over Icynene's LD-C-50, 0.5 pound, open cell foam at 400 square feet per gallon. DC 315 was tested by AC 377 appendix X standards as an ignition barrier....
DC-315 Continues To Set The Bar In The Alternative Barrier Coating Market
International Fireproof Technology, Inc. and Paint to Protect recently announced that they successfully passed the NSF/ANSI 51(2009) Food Equipment, Materials-Formulation Review and Extraction Testing using DC-315 Water Based Fireproof Paint. The test sample...
DC 315 Is Added to Multiple Johns Manville Foams
Johns Manville and International Fireproof Technology Inc. (IFTI) announced the addition of DC 315 to ICC ES report numbers ESR 3287 and ESR 3159 for use over JM Corbond MCSTM CC 2 lb. and JM ccSPFTM CC 2lb foams. The ICC ES reports recognize DC 315TM as an...
Ignition Barrier Coating Over QuadFoam Spray Foam Passes Testing
International Fireproof Technology, Inc. ran a NFPA 286 test consisting of DC 315 applied over QuadFoam 2.0 LB. closed-cell spray polyurethane foam This testing satisfies the requirements of the ICC regarding acceptable testing certification requirements to be used...
DC 315 Continues to Pass Testing as an Ignition and Thermal Barrier
International Fireproof Technology Inc. (IFTI) and Gaco Western announced today that IFTI’s DC315 spray-applied coating passed over GacoGreen 052N .5 pound open cell foam as an Ignition and Thermal Barrier. Ignition Barrier: Industry leading application rate of 400...
IFTI and Henry Announce Passing of Fire Test for Alternative Thermal Barrier on PERMAX Closed-Cell Spray Foam
International Fireproof Technology Inc. (IFTI) and Henry® announced today that DC315 spray-applied coating passed a certified NFPA 286 test over PERMAX™ 1.8 lb. closed-cell spray polyurethane foam at Intertek Labs in San Antonio, Texas. DC315 was tested at 21 wet...
Dow Chemical Lists IFTI’s DC315 as Alternative Thermal Barrier for Wall Assemblies
The Dow Chemical Company's revised ESR report, ESR-1659 dated April 1, 2012, lists International Fireproof Technology Inc.'s (IFTI's) DC315 as an approved alternative thermal barrier. DC315 is listed for use on THERMAX 4.25" and 3.0" Insulation Boards. Gary Wolfe...
DC315 Passes Its 30th Full Scale SPF Fire Test at Intertek
International Fireproof Technology Inc. (IFTI) and Gaco Western announced today that DC315 spray applied coating, passed over GacoGreen 052 - 0.5 lb. open cell foam as an ignition and thermal barrier. Gary Wolfe Executive Vice President of IFTI states, “The addition...